Papers

Papers

If you are interested in one of the papers below, then just get in touch with us!

Hull Form Variations for Improved Sailing Balance of Wind-Assisted Propelled Ships
Fabian Thies, Hannes Renzsch
HIPER 2024 (16th Symposium on High-Performance Marine Vehicles – “Technologies for the Ship of the Future”)
© June 2024 | Drübeck, Germany | English
Optimisation of an Air Lubrication System for Geometry and Topology: A Proposed Solution for Ship Retrofitting
Hannes Renzsch, Andrew Spiteri, Eduardo Blanco-Davis, Milad Armin, Alex Routledge
HIPER 2024 (16th Symposium on High-Performance Marine Vehicles – “Technologies for the Ship of the Future”)
© June 2024 | Drübeck, Germany | English
Optimization and Surrogate Modeling of Tip-Rake Propellers
Andreas Arapakopoulos, Claus Abt, Simon Hauschulz, Stefan Harries
SMP 2024 (Eighth International Symposium on Marine Propulsors)
TUHH Open Research Access: https://doi.org/10.15480/882.9315
© March 2024 | Berlin, Germany | English
Simulation-driven design of a fast monohull
Stefan Harries, Osama Ahmed, Sebastian Uharek
Ship Technology Research
https://www.tandfonline.com/doi/full/10.1080/09377255.2024.2305540 (open access)
© February 2024 | English
Parametric Design and Optimization of Planing Hull; a comparison of optimization methods
Osama Ahmed, Aaron Godfrey, Stefan Harries, and Miles Wheeler
25th Numerical Towing Tank Symposium (NuTTS)
© October 2023 | Ericeira, Portugal | English
Hydrodynamic Optimization of Ships with Retrofitted WASP-Systems
Hannes Renzsch, Fabian Thies
INNOV’SAIL
© May 2023 | Lorient, France | English
Parametric Modeling, CFD Simulations, DoE and Machine Learning for the Design of a Planing Boat
Osama Ahmed, Stefan Harries, Jakob Lohse, Sven-Eric Salecker
COMPIT 2023 (22nd Conference on Computer Applications and Information Technology in the Maritime Industries)
© May 2023 | Kloster Drübeck, Germany | English
3D Mapping of Underwater Hulls for Robotic Guidance
Volker Bertram, Stefan Harries
COMPIT 2023 (22nd Conference on Computer Applications and Information Technology in the Maritime Industries)
© May 2023 | Kloster Drübeck, Germany | English
Optimisation of an Electric Catamaran in the Early Design Stage
Thomas Hildebrandt, Sven Albert, Stefano Carugno, Günther Migeotte, Stefan Harries, Heinrich von Zadow
COMPIT 2023 (22nd Conference on Computer Applications and Information Technology in the Maritime Industries)
© May 2023 | Kloster Drübeck, Germany | English
The Need for Sufficiently Accurate Geometrical Representations of Ship Hull Forms for Digital Twins for Performance Prediction
Stefan Harries, Jörg Brunswig, Scott Gatchell, Simon Hauschulz, Arndt Schuhmachen, Fabian Thies, Jochen Marzi
The 8th International Symposium on Ship Operations, Management & Economics (SOME)
Copyright © 2023 Society of Naval Architects and Marine Engineers (SNAME)
7-8 March 2023 | Athens, Greece | English
Re-Creating 3D Ship Geometries as Maps for Inspection and Reporting
Volker Bertram, Stefan Harries
3rd Port In-Water Cleaning Conference (PortPIC’22)
© September 2022 | Hamburg, Germany | English
Hull Form Optimization for Wind-Powered Ships
Fabian Thies, Hannes Renzsch
HIPER 2022 (14 th Symposium on High-Performance Marine Vehicles)
© August 2022 | Cortona, Italy | English
Web-based Microservices for Fast Modeling and Easy Collaboration
Simon Hauschulz, Stefan Harries, Fabian Thies, Heinrich von Zadow
HIPER 2022 (14 th Symposium on High-Performance Marine Vehicles)
© August 2022 | Cortona, Italy | English
Comparing Hydrodynamics of Original and Remodeled Hull Forms and Appendages for Digital Twins
Stefan Harries, Fabian Thies, Simon Hauschulz, Jochen Marzi, Scott Gatchell
COMPIT 2022 (21st Conference on Computer Applications and Information Technology in the Maritime Industries )
© June 2022 | Pontignano, Italy | English
Aerodynamic Optimization of a Reduced Scale Model of a Ground Vehicle with a Shape Morphing Technique
Ceyhan Erdem, Yoann Eulalie, Philippe Gilotte, Stefan Harries and Christian N. Nayeri
Fluids Journal 2022, 7, 166.
https://www.mdpi.com/1624880 (open access)
© May 2022 | English
Application of Radial Basis Functions for Partially-Parametric Modeling and Principal Component Analysis for Faster Hydrodynamic Optimization of a Catamaran
Stefan Harries, Sebastian Uharek
Journal of Marine Science and Engineering (JSME) – Special Issue: Hydrodynamic Design of Ships
https://doi.org/10.3390/jmse9101069 (open access)
© September 2021 | English
Hydrodynamic Optimization of a Small Electric Catamaran Ferry
Sven Albert, Thomas Hildebrandt, Stefan Harries, Erik Bergmann, Massimo Kovacic
13th Symposium on High-Performance Marine Vehicles (HIPER 2021)
© September 2021 | Tullamore, Ireland | English
Parametric Modeling and Hydrodynamic Optimization of an Electric Catamaran Ferry based on Radial Basis Functions for an Intuitive Set-up
Albert, S.; Hildebrandt, T.; Harries, S.; Bergmann, E.; Kovacic, M.
Computer Applications and Information Technology in the Maritime Industries (COMPIT 2021)
© August 2021 | Mühlheim an der Ruhr, Germany | English
Design of a Double Ended Ferry
Markus Jokinen, Riccardo Broglia, Scott Gatchell, Adrien Aubert, Rachmat Gunawan, Gregor Schellenberger, Stefan Harries, Heinrich von Zadow
In: A. Papanikolaou (Ed.), A Holistic Approach to Ship Design – Vol. 2: Application Case Studies, Springer
https://doi.org/10.1007/978-3-030-71091-0_12
© 2021 | English
Gravity Base Foundation Concept for a Platform in Icy Shallow Waters
Justice Anku-Vinyoh, Sakari Oja, Antti Ajosmäki, Johanna Sjölund, Michael Hübler, Santiago Ferrer Mur, Deborah Kaschube, Ceyhan Erdem, Philipp Knüppel
In: A. Papanikolaou (Ed.), A Holistic Approach to Ship Design – Vol. 2: Application Case Studies, Springer
https://doi.org/10.1007/978-3-030-71091-0_10
© 2021 | English
Integration of Tools for Application Case Studies
Stefan Harries, Claus Abt
In: A. Papanikolaou (Ed.), A Holistic Approach to Ship Design – Vol. 2: Application Case Studies, Springer
https://doi.org/10.1007/978-3-030-71091-0_2
© 2021 | English
Engine Combustion System Optimization Using Computational Fluid Dynamics and Machine Learning: A Methodological Approach
Jihad A. Badra, Fethi Khaled, Meng Tang, Yuanjiang Pei, Janardhan Kodavasal, Pinaki Pal, Opeoluwa Owoyele, Carsten Fütterer, Mattia Brenner, Farooq Aamir
Journal of Energy Resources Technology, Vol. 143, February 2021
© February 2021 | English
A Holistic Approach to Ship Design: Tools and Applications
Apostolos Papanikolaou, Stefan Harries, Patrick Hooijmans, Jochen Marzi, Romain Le Néna, Sverre Torben, Antti Yrjänäinen, Brigitte Boden
Journal of Ship Research, December 2020, pp. 1–29
http://dx.doi.org/10.5957/JOSR.12190070
© December 2020 | English
Piston Bowl Geometry Effects on Gasoline Compression Ignition in a Heavy-Duty Diesel Engine
Meng Tang, Yuanjiang Pei, Hengjie Guo, Yu Zhang, Roberto Torelli, Daniel Probst, Carsten Fütterer, Michael Traver
Proceedings of the ASME 2020: Internal Combustion Engine Division Fall Technical Conference (ICEF2020)
© November 2020 | Denver, CO, USA | English
An Electrified RIV A Powerboat – Optimised
Sven Albert, Rodrigo Corrêa, Thomas Hildebrand, Stefan Harries
12th Symposium on High-Performance Marine Vehicles (HIPER 2020)
© October 2020 | Cortona, Italy | English
Influence of Key Design Parameters on the Aerodynamic Performance of a Centrifugal Compressor Volute for Turbocharger Applications
Pier Francesco Melani, Francesco Balduzzi, Alessandro Bianchini, Giovanni Ferrara, Pierre-Alain Hoffer, Stephane Montesino, Mattia Brenner
ASME Turbomachinery Technical Conference & Exposition (Turbo Expo 2020)
© September 2020 | London, UK | English
Practical Shape Optimization Using CFD: State-Of-The-Art in Industry and Selected Trends
Stefan Harries
Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT 2020)
© August 2020 | Pontignano, Italy | English
Prediction of Heading Stability under Wind and Waves
Andrés Cura-Hochbaum, Sebastian Uharek
33rd Symposium on Naval Hydrodynamics 31 May – 5 June 2020
© June 2020 | Osaka, Japan
Combustion System Optimization of a Light-Duty GCI Engine Using CFD and Machine Learning
Jihad Badra, Fethi khaled, Jaeheon Sim, Yuanjiang Pei, Yoann Viollet, Pinaki Pal, Carsten Fütterer, Mattia Brenner, Sibendu Som, Aamir Farooq, Junseok Chang
SAE Technical Paper
© April 2020 | English
Methods of Simulation-driven Design in the Maritime Industry
von Zadow H., Harries S., Macedo P., Saroch M.
Proceedings of the 6th International Conference on Ship and Offshore Technology (ICSOT 2019)
© November 2019 | Kharagpur, India | English
A Holistic Approach to Ship Design: Tools and Applications
Papanikolaou A., Flikkema M., Harries S., Marzi J., Le Néna R., Torben S., Yrjänäinen A.
SNAME Maritime Convention (SMC 2019)
© October 2019 | Tacoma, Washington, USA | English
Faster Turn-around Times for the Design and Optimization of Functional Surfaces
Harries S., Abt C.
Ocean Engineering 193 (2019) 106470, Elsevier
© October 2019 | English
Optimizing Turbochargers for High-performance Engines
Fröhlig F., Lachenmaier N., Harries S., Fütterer C., Ratz J., Wendl K., Hildebrandt T.
EnginSoft Newsletter Year 16 n. 3
© Autumn 2019 | English
Fully Automatic Design Space Exploration by RANS Computations
Uharek S., Harries S., Cura Hochbaum A.
11th International Workshop on Ship and Marine Hydrodynamics (IWSH2019)
© September 2019 | Hamburg, Germany | English
Novel Approaches for sCO2 Axial Turbine Design
Sathish S., Kumar P., Namburi A., Swami L., Fuetterer C., Gopi P.
Proceedings of ASME Turbo Expo 2019: Turbine Technical Conference and Exposition
© July 2019 | Phoenix, Arizona, USA | English
Tip Geometry Effects on Performance and Erosion for Tip Rake Propellers
Sánches Castro L. F., von Zadow H., Vesting F.
Sixth International Symposium on Marine Propulsors (SMP’19)
© May 2019 | Rome, Italy | English
Approach to Holistic Ship Design – Methods and Examples
Harries S., Dafermos G., Kanellopoulou A., Florean M., Gatchell S., Kahva E., Macedo P.
Computer Applications and Information Technology in the Maritime Industries (COMPIT 2019)
© March 2019 | Tullamore, Ireland | English
CFD-Guided Combustion System Optimization of a Gasoline Range Fuel in a Heavy-Duty Compression Ignition Engine Using Automatic Piston Geometry Generation and a Supercomputer
Yuanjiang Pei, Pinaki Pal, Yu Zhang, Michael Traver, David Cleary, Carsten Fuetterer, Mattia Brenner, Daniel Probst, Sibendu Som
International Powertrains, Fuels & Lubricants Meeting
© January 2019 | San Antonio, Texas, USA | English
The HOLISHIP Platform for Process Integration and Design Optimization
Harries S., Abt C.
published by A. Papanikolaou (Ed.) in A Holistic Approach to Ship Design – Vol. 1: Optimisation of Ship Design and Operation for Life Cycle, Springer 978-3-030-02809-1
© 2019 | English
Super Parameters Massively Reduce Time and Complexity to Optimize Shapes for Improved Fluid Dynamic Behaviour
Harries S.
EnginSoft Newsletter Year 15 n. 4
© Winter 2018 | English
Resistance and Payload Optimization of a Sea Vehicle by Adaptive Multi-Fidelity Metamodeling
Pellegrini, R., Serani, A., Broglia, R., Diez, M. and Harries, S.
2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (p. 1904)
© 2018 | English
Massive Parameter Reduction for faster Fluid-dynamic Optimization of Shapes
Bergmann E., Fütterer C., Harries S., Palluch J.
Int. CAE Conference and Exhibition
© October 2018 | Vicenza, Italy | English
High-level Demonstration of Holistic Design and Optimisation Process of Offshore Supply Vessel
Jongh de M., Olsen K.E., Berg B., Jansen J.E., Torben S., Abt C., Dimopoulos G., Zymaris A., Hassani V.
13th Int. Marine Design Conference (IMDC 2018)
© June 2018 | Helsinki, Finland | English
HOLISTIC Ship Design Optimisation
Marzi J., Papanikolaou A., Brunswig J., Corrignan P., Zaraphonitis G., Harries S.
13th Int. Marine Design Conference (IMDC 2018)
© June 2018 | Helsinki, Finland | English
Appification of Propeller Modeling and Design via CAESES
Harries S., Lorentz K., Palluch J., Praefke E.
COMPIT 2018
© May 2018 | Pavone, Italy | English
HOLISTIC Ship Design for Future Waterborne Transport
J. Marzi, A. Papanikolaou, P. Corrignan, G. Zaraphonitis, S. Harries
Proceedings of 7th Transport Research Arena TRA 2018
© April 2018 | Vienna, Austria | English
Software Platform for the Holistic Design and Optimisation of Ships
S. Harries, C. Cau, J. Marzi, A. Papanikolaou, A. Kraus, G. Zaraphonitis
Jahrbuch der Schiffbautechnischen Gesellschaft 2017 (STG 2017)
© 2017 | Germany | English
Living in the Cloud – How Web-Based Apps will make High-Tech more Accessible
Stefan Harries
The Naval Architect Magazine
© September 2017 | English
The Democratization of High Performance Marine CFD: A View from the Numerical, the Application and the Business Perspective
Thomas Hildebrandt, Sven Albert, Stefan Harries, Matthias Reyer
HIPER 2017 – 11th Symposium on High-Performance Marine Vehicles – “Technologies for the Ship of the Future”
© September 2017 | Zevenwacht, South Africa | English
Simulation-driven Design of a Rim Drive for an Autonomous Vehicle
Heinrich Grümmer, Stefan Harries and Andrés Cura Hochbaum
Fifth International Symposium on Marine Propulsors smp’17
© June 2017 | Espoo, Finland | English
Simulation-Driven Design of Sailing Yachts and Motor Boats
Bodo Hasubek, Stefan Harries
VII International Conference on Computational Methods in Marine Engineering (MARINE 2017)
© May 2017 | Nantes, France | English
Multi-Objective Hull-Form Optimization of a SWATH Configuration via Design-Space Dimensionality Reduction, Multi-Fidelity Metamodels, and Swarm Intelligence
R. Pellegrini, A. Serani, S. Harries, M. Diez
VII International Conference on Computational Methods in Marine Engineering (MARINE 2017)
© May 2017 | Nantes, France | English
Optimization of a Self-Righting Hull and a Thruster Unit for an Autonomous Surface Vehicle
Heinrich Grümmer, Stefan Harries, Andrés Cura Hochbaum
Computer Applications and Information Technology in the Maritime Industries (COMPIT 2017)
© May 2017 | Cardiff, UK | English
Trends in Turbomachinery Aerodynamic Optimization: a Software Vendor’s Point of View
Mattia Brenner
VKI Workshop on Turbomachinery Aerodynamic and Multidisciplinary Optimization: Current State of the Art and Future Trends
© November 2016 | Brussels, Belgium | English
Pushing processes and performance by parametric design of boats and yachts
Claus Abt, Stefan Harries
24th Int. HISWA Symp. Yacht Design and Yacht Construction
© November 2016 | Amsterdam, Netherlands | English
Direct Coupling of Parametric CAD and Adjoint CFD for the Efficient Optimization of Flow Geometries
Mattia Brenner, Carsten Fütterer, Stefan Harries
NAFEMS Seminar: Adjoint CFD Methods in Industrial Application and Research
© October 2016 | Wiesbaden, Germany | English and German version available
Hyrodynamic Optimization of a Power Boat in the Cloud
Sven Albert, Stefan Harries, Thomas Hildebrandt, Matthias Reyer
High-Performance Marine Vehicles (HIPER 2016)
© October 2016 | Cortona, Italy | English
Real Cost Savings for a Waterjet-driven Patrol Craft Design Using a CAESES-NavCad Coupled Solution
Donald MacPherson, Stefan Harries, Simon Broenstrup, Joseph Dudka
Computer Applications and Information Technology in the Maritime Industries (COMPIT 2016)
© May 2016 | Lecce, Italy | English
Simulation-ready CAD for Fast Turn-Around Time in CFD and Optimization
Mattia Brenner, Stefan Harries, Jörg Palluch, Johannes Ratz
NAFEMS European Conference: Computational Fluid Dynamics (CFD) – Beyond the Solve
© December 2015 | Munich, Germany | English
Upfront CAD – Parametric Modeling Techniques for Shape Optimization
Stefan Harries, Claus Abt, Mattia Brenner
International Conference on Evolutionary and Deterministic Methods for Design, Optimization and Control with Applications to Industrial and Societal Problems (EUROGEN 2015)
published by E. Minisci et al. (Eds.) in Advances in Evolutionary and Deterministic Methods for Design, Optimization and Control in Engineering and Sciences, Springer 978-3-319-89986-2
© September 2015 (2018) | Glasgow, UK | English
An Optimization Process for Propeller Design and its Application Based on CFD
Jeong-yong Park, Milovan Peric, Daehwan Park
International Ocean and Polar Engineering Conference (ISOPE 2015)
© June 2015 | Hawaii, USA | English
Significance of Parametric Hull Form Definition on Hydrodynamic Performance Optimization
S. Brizzolara, G. Vernengo, C. A. Pasquinucci, S. Harries
Computational Methods in Marine Engineering (Marine 2015)
© June 2015 | Rome, Italy | English
Parametric-Adjoint Approach for the efficient Optimization of Flow-Exposed Geometries
Mattia Brenner, Stefan Harries, Jörn Kröger, Thomas Rung
Computational Methods in Marine Engineering (Marine 2015)
© June 2015 | Rome, Italy | English
Speed-Power Optimized AUV Design by Coupling CAESES and NavCad
Stefan Harries, Donald MacPherson, Anthony Edmonds
Computer Applications and Information Technology in the Maritime Industries (COMPIT 2015)
© May 2015 | Ulrichshusen, Germany | English
Practical Shape Optimization using CFD
Stefan Harries
Whitepaper
© February 2015 | Potsdam, Germany | English
Retrofitting Vessels for Optimized Fuel Consumption
Helio Bailly Guimaraes, Mattia Brenner, Jose Manuel Fernandes Hernando, Sonsoles Jimenez Caballero, Stefan Harries, Matthias Maasch
2nd International Symposium on Naval Architecture and Maritime (INT-NAM 2014)
© October 2014 | Istanbul, Turkey | English
Structural Optimization of Midship Sections for Container Vessels coupling POSEIDON with CAESES / FRIENDSHIP-Framework
Benjamin Zeitz, Anders Matthiesen, Stefan Harries, Andreas Flehmke, Volker Bertram
13th International Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT 2014)
© May 2014 | Redworth, UK | English
CONTiOPT – Holistic Optimisation of a High Efficiency and Low Emission Containership
Martin Köpke, Apostolos Papanikolaou, Stefan Harries, Lampros Nikolopoulos, Pierre Sames
Transport Research Arena (TRA 2014)
© April 2014 | Paris, France | English
Design Studies and Optimization of Functional Surfaces Utilizing Open Source CFD
Sebastian Weickgenannt, Jörg Palluch, Mike Saroch, Benjamin Leroy, André Zimmer
NAFEMS World Congress (NWC 2013)
© June 2013 | Salzburg, Austria
Optimization Using Viscous Flow Computations for Retrofitting Ships in Operation
Mattia Brenner, Vassilios Zagkas, Stefan Harries, Tobias Stein
5th Conference on Computational Methods in Marine Engineering (MARINE 2013)
© May 2013 | Hamburg, Germany
Port Efficiency Simulations for the Design of Container Ships
Stefan Harries, Erik Dölerud, Pierre C. Sames
12th International Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT 2013)
© April 2013 | Cortona, Italy
FORM-PRO – Hydrodynamische Optimierung von Schiffen mit aktiver Propulsion
Mattia Brenner, Stefan Harries, Stefan Wunderlich, Jörn Kröger, Arthur Stück und Thomas Rung, Scott Gatchell, Lars-Uve Schrader, Jochen Marzi
BMWi Statustagung
© December 2012 | German
Robust Ship Design Optimization using Multidisciplinary Optimization and Stochastic Analysis
Dirk Roos, Stefan Harries, Jörg Palluch
9th Annual Weimar Optimization and Stochastic Days (WOSD 2012)
© November 2012 | Weimar, Germany
Parametergestützte adjungierte Sensitivitätsanalyse zur Rumpfformoptimierung
Brenner, M., Harries, S., Wunderlich, S., Kröger, J., Stück, A., Rung, T., Gatchell, S., Schrader, L.-U., Marzi, J.
107. Hauptversammlung Schiffbautechnische Gesellschaft, STG, Bd. 106
© November 2012 | Hamburg, Germany
Parametric Adjoint Analysis of Viscous flow for Improvement of Ship Hull Forms
M. Brenner, S. Harries, S. Wunderlich, J. Kröger, A. Stück, T. Rung, S. Gatchell, L.-U. Schrader, J. Marzi
Jahrbuch der Schiffbautechnischen Gesellschaft 2012 (STG 2012)
© May 2012 | Germany | English
Domain Preparation for RANSE Simulations about Assemblies of Functional Surfaces
Claus Abt, Erik Bergmann, Stefan Harries
11th International Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT 2012)
© April 2012 | Liege, Belgium
From Analysis towards Design in Seakeeping
Stefan Harries, Jan Land, Sebastian Weickgenannt, Wei Qiu
11th International Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT 2012)
© April 2012 | Liege, Belgium
BEST Plus – Better Economics with Safer Tankers
Pierre C. Sames, Apostolos Papanikolaou, Stefan Harries, Kevin P. Coyne, George Zaraphonitis, Fabian Tillig
Proceedings of SNAME Annual Meeting and Expo 2011
© November 2011 | Houston, Texas, USA
Design for Energy Efficiency: Simulation-Driven Design and Hydrodynamic Optimization for Greener Ships and EEDI Compliance
Mattia Brenner, Bekir Şener
1st International Symposium on Naval Architecture and Maritime (INT-NAM 2011)
© October 2011 | Istanbul, Turkey
Integrated Ship Design and Multiobjective Optimization Approach to Ship Design
Apostolos Papanikolaou, Stefan Harries, Marc Wilken, George Zaraphonitis
International Conference on Computer Applications in Shipbuilding (ICCAS 2011)
© September 2011 | Trieste, Italy
Trimaran Hull Form Development for America’s Marine Highways EXPRESS SERVICE Trailership
Igor Mizine, Mattia Brenner, Murthy Chitrapu, William Danilczyk, Gerco Hagesteijn, Stefan Harries
11th International Conference on Fast Sea Transportation (FAST 2011)
© September 2011 | Honolulu, Hawaii, USA
On Design-Space Exploration and Design Refinement by Numerical Simulation
Patrick Couser, Stefan Harries, Fabian Tillig
RINA International Conference on Marine Design
© September 2011 | Coventry, UK
Better Economics with a Safer Tanker
Pierre C. Sames, Apostolos Papanikolaou, Stefan Harries, Kevin P. Coyne
RINA International Conference ‘Design and Operation of Tankers’
© June 2011 | Athens, Greece
Hull Form Development for a High-Speed Trimaran Trailership
Igor Mizine, Stefan Harries, Mattia Brenner
9th Symposium on High Speed Marine Vehicles (HSMV 2011)
© May 2011 | Naples, Italy
An Integrated Approach for Simulation in the Early Ship Design of a Tanker
Stefan Harries, Fabian Tillig, Marc Wilken, George Zaraphonitis
10th International Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT 2011)
© May 2011 | Berlin, Germany
Numerical Hull Series for Calm Water and Sea-Keeping
Patrick Couser, Stefan Harries, Fabian Tillig
10th International Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT 2011)
© May 2011 | Berlin, Germany
Coupling of CAD, Simulation and Optimization
Jörg Palluch
NAFEMS Seminar ‘The Integration of CFD into the Product Development Process’
© April 2011 | Wiesbaden, Germany
Investigating Multi-dimensional Design Spaces Using First Principle Methods
Stefan Harries
Seventh International Conference On High-Performance Marine Vehicles (HIPER 2010)
© October 2010 | Melbourne, Florida, USA
Simulated prototyping. FRIENDSHIP-Framework: A holistic approach to optimization in ship design
Claus Abt, Stefan Harries, Anne Wenzek
nonstop 01/2010
© June 2010 | Hamburg, Germany
New approach to VPP
Kevin Cudby
Ship & Boat International March/April 2010 [Reprinted with permission from the Royal Institution of Naval Architects in Ship & Boat International March/April 2010]
© March/April 2010
Aerodynamic Optimization of Superstructures and Components
Stefan Harries, Florian Vesting
International Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT 2010)
© April 2010 | Gubbio, Italy
Feature Modelling and Simulation-driven Design for Faster Processes and Greener Products
Mattia Brenner, Claus Abt, Stefan Harries
International Conference on Computer Applications in Shipbuilding (ICCAS 2009)
© September 2009 | Shanghai, China
Parametric Modeling for Optimal Components in Turbomachinery
Jörg Palluch, Andre Starke, Stefan Harries
Worldwide Turbocharger Conference
© August 2009 | Hamburg, Germany
Flexible Tool Integration for Simulation-driven Design using XML, Generic and COM Interfaces
Claus Abt, Stefan Harries, Stefan Wunderlich, Benjamin Zeitz
International Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT 2009)
© May 2009 | Budapest, Hungary
DSME sharpens edge for 14,000 TEU carrier
Yeon-Seung Lee, Young-Bok Choi, Stefan Harries
The Naval Architect, Design and Construction of Containerships
© July 2008
Integration of CAD and CFD for the Hydrodynamic Design of Appendages in Viscous Flow
Mattia Brenner
Thesis, Technical University Berlin
© June 2008 | Berlin, Germany
Direct Coupling of CAD and CFD for the Design of Functional Surfaces
Claus Abt, Stefan Harries
NAFEMS Seminar: ‘Simulation Driven Design – Potential and Challenges’
© March 2008 | Wiesbaden, Germany
Tight and Loose Coupling CAD and CFD – Methods, Practical Aspects, Advantages
Claus Abt, Stefan Harries
RINA Marine CFD 2008
© March 2008 | Southampton, UK
Serious Play in Ship Design
Stefan Harries
Tradition and Future of Ship Design in Berlin, Colloquium, Technical University Berlin
© February 2008 | Berlin, Germany
Serious Play in Ship Design (abridged version)
Stefan Harries
Tradition and Future of Ship Design in Berlin, Colloquium, Technical University Berlin
© February 2008 | Berlin, Germany
Development and Application of a new Form Feature to enhance the Transport Efficiency of Ships
Stefan Harries, Haye Hinrichsen, Karsten Hochkirch
102. Hauptversammlung Schiffbautechnische Gesellschaft
© November 2007 | Berlin, Germany
An Integrated Approach for Hydrodynamic Optimization of SWATH Hull Forms
Claus Abt, Gregor Schellenberger
PRADS 2007 Symposium
© October 2007 | Houston, Texas, USA
Comparison of Different Parameterization and Optimization Approaches in the Field of Aerodynamic Compressor Blade Design
Akin Keskin, Marius Swoboda, Jörg Palluch, Claus Abt
1st CEAS European Air and Space Conference Century Perspectives
© September 2007 | Berlin, Germany
Hull Variation and Improvement using the Generalised Lackenby Method of the FRIENDSHIP-Framework
Claus Abt, Stefan Harries
The Naval Architect, RINA
© September 2007
A New Approach to Integration of CAD and CFD for Naval Architects
Claus Abt, Stefan Harries
6th International Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT 2007)
© April 2007 | Cortona, Italy
Analysis of Wave Making Resistance And Optimization of Canting Keel Bulbs
Karsten Hochkirch, Claudio Fassardi
The 18th Chesapeake Sailing Yacht Symposium
© March 2007 | Annapolis, MD, USA
Ferry Wake Wash Analysis in San Francisco Bay
S. Anil Kumar, Justus Heimann, Bruce L. Hutchison, Scott W. Fenical
Int. Ports Conference (PORTS 2007), American Society of Civil Engineers (ASCE)
© March 2007 | San Diego, California, USA
FRIENDSHIP-Framework – integrating ship-design modelling, simulation, and optimisation
Claus Abt, Stefan Harries
The Naval Architect, RINA
© January 2007
Advanced Hydrodynamic Design of Container Carriers for Improved Transport Efficiency
Stefan Harries, Claus Abt, Justus Heimann, Karsten Hochkirch
Royal Institution of Naval Architects, Design & Operation of Container Ships
© November 2006 | London, UK
CFD – based Optimization of the Wave-Making Characteristics of Ship Hulls
Justus Heimann
101. Hauptversammlung Schiffbautechnische Gesellschaft, Hamburg
© November 2006 | Hamburg, Germany | paper published in STG, Bd. 100, 2006
VIRTUE: integrating CFD ship design
Alex Duffy, Stefan Harries, Jochen Marzi, Christoph Petz, Zichao Wu
7th International Conference on Hydrodynamics (ICHD 2006)
© October 2006 | Ischia, Italy
OptiSWATH – A new way towards optimum SWATH Design
Tanja Richardt, Peer Wetterling
HANSA 09/2006
© 2006 | Hamburg, Germany
Sailboat Design by Response Surface Optimization
Claudio D. Fassardi, Karsten Hochkirch
2nd High Performance Yacht Design Conference
© February 2006 | Auckland, New Zealand
Hydrodynamic Fine-Tuning of a Pentamaran for High-Speed Sea Transportation Services
Ed Dudson, Stefan Harries
8th International Conference on Fast Sea Transportation (FAST 2005)
© June 2005 | St. Petersburg
Maneuvering Simulations for Ships and Sailing Yachts using FRIENDSHIP-Equilibrium as an Open Modular Workbench
Tanja Richardt, Stefan Harries, Karsten Hochkirch
International EuroConference on Computer Applications and Information Technology in the Maritime Industries (COMPIT 2005)
© May 2005 | Hamburg, Germany
Novel Design and Hydrodynamic Optimisation of a High-Speed Hull Form
L. Koh, M. Atlar, E. Mesbahi, Carl-Erik Janson, Lars Larsson, Claus Abt
5th International Conference on High Performance Marine Vessels
© April 2005 | Shanghai, China
Constraint Management for Marine Design Applications
Claus Abt, Stefan Harries, Karsten Hochkirch
International Symposium on Practical Design of Ships and Other Floating Structures (PRADS 2004)
© September 2004 | Lübeck-Travemünde, Germany
Modeling meets Simulation – Process Integration to improve Design
Stefan Harries, Claus Abt, Karsten Hochkirch
Sonderkolloquium zu Ehren der Professoren Hagen, Schlüter und Thiel (Honorary colloquium for Prof. Hagen, Prof. Schlüter and Prof. Thiel)
© July 2004
A Systematic Study on Posing and Solving the Problem of Pareto Optimal Ship Routing
Jörn Hinnenthal, Stefan Harries
3rdInternational Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT 2004)
© May 2004 | Siguënza, Spain
OPTIMISTIC Optimization in Marine Design
Lothar Birk, Stefan Harries (Edt.)
Mensch & Buch Verlag, ISBN 3-89820-514-2
© 2003 | not available for download
Optimization of the Wave-making Characteristics of Fast Ferries
Stefan Harries, Justus Heimann
7th International Conference on Fast Sea Transportation (FAST 2003)
© October 2003 | Ischia (Golf of Naples), Italy
Hydrodynamic Design of the Aftbody Shape of a RoRo Vessel
Federica Valdenazzi, Stefan Harries, Chiara Pittaluga, Claus Abt, Gennaro Avellino
International Conference on Ship and Shipping Research (NAV 2003)
© June 2003 | Palermo, Italy
The Fantastic RoRo: CFD Optimisation of the Forebody and its Experimental Verification
Federica Valdenazzi, Stefan Harries, Carl-Erik Janson, Michael Leer-Andersen, Jean-Jacques Maisonneuve, Jochen Marzi, Hoyte Raven
International Conference on Ship and Shipping Research (NAV 2003)
© June 2003 | Palermo, Italy
Pareto Optimal Routing of Ships
Stefan Harries, Justus Heimann, Jörn Hinnenthal
International Conference on Ship and Shipping Research (NAV 2003)
© June 2003 | Palermo, Italy
Parametric Hull Design: The FRIENDSHIP-Modeler
Claus Abt, Lothar Birk, Stefan Harries
International Conference on Ship and Shipping Research (NAV 2003)
© June 2003 | Palermo, Italy
Seakeeping Assessment for High-Speed Monohulls – A Comparative Study
Gregory J. Grigoropoulos, Stefan Harries, D P Damala, Lothar Birk, Justus Heimann
International Marine Design Conference (IMDC03)
© May 2003 | Athens, Greece
Towards Optimal Design of Ship Hull Shapes
Jean-Jacques Maisonneuve, Stefan Harries, Jochen Marzi, Hoyte C. Raven, Umberto Viviani, H. Piippo
8th International Marine Design Conference (IMDC03)
© May 2003 | Athens, Greece
From Redesign to Optimal Hull Lines by means of Parametric Modeling
Claus Abt, Stefan Harries, Justus Heimann, Henning Winter
2nd International Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT 2003)
© May 2003 | Hamburg, Germany
Advanced Parametric Yacht Design
Karsten Hochkirch, Klaus Röder, Claus Abt, Stefan Harries
High Performance Yacht Design Conference
© December 2002 | Auckland, New Zealand
Effiziente Geometrieerzeugung im modernen Yachtentwurf (Efficient Geometric Modeling in Modern Yacht Design)
Claus Abt, Stefan Harries, Karsten Hochkirch
22. Symposium für Yachtbau und Yachtkonstruktion
© November 2001 | Hamburg, Germany
Parametric Hull Form Design – A Step Towards One Week Ship Design
Claus Abt, S D Bade, Lothar Birk, Stefan Harries
8thth International Symposium on Practical Design of Ships and Other Floating Structures (PRADS 2001)
© September 2001 | Shanghai, China
Investigation on Optimization Strategies for the Hydrodynamic Design of Fast Ferries
Stefan Harries, Federica Valdenazzi, Claus Abt, Umberto Viviani
6th International Conference on Fast Sea Transportation (FAST 2001)
© September 2001 | Southampton
Hydrodynamic Modeling of Sailing Yachts
Stefan Harries, Claus Abt, Karsten Hochkirch
The 15th Chesapeake Sailing Yacht Symposium (CSYS)
© 2001 | Annapolis, MD, USA
Hydrodynamische Optimierung von Schiffsformen auf Basis parametrischer Entwurfsmethoden (Hydrodynamic Optimization of Ship Hull Forms on the Basis of Parametric Design Methods)
Stefan Harries
Schriftliche Fassung zum gleichnamigen Vortrag, STG, Bd. 94
© November 2000 | Hamburg, Germany
Systematische Untersuchung der Hydrodynamik historischer Großsegler (Systematic Analysis of the Hydrodynamics of Historical Sailing Vessels)
Stefan Harries, Dirk Böndel, Konrad Geistert, Karsten Hochkirch
Schriftliche Fassung zum gleichnamigen Vortrag, 95. Hauptversammlung der STG
© November 2000 | Hamburg, Germany
Numerical Simulation and Validation of the Flow about Optodes for Measurements with Optical Fibres
Stefan Harries, R Stück
Bericht Nr. 1298 / 2000, Zentraleinrichtung Versuchsanstalt für Wasserbau und Schiffbau, Technische Universität Berlin © September 2000 | Berlin, Germany | not available for download
Automated Optimization – A Complementing Technique for the Hydrodynamic Design of Ships and Offshore Structures
Lothar Birk, Stefan Harries
International EuroConference on Computer Applications and Information Technology in the Maritime Industries (COMPIT 2000)
© March/April 2000 | Potsdam/Berlin, Germany
Formal Hydrodynamic Optimization of a Fast Monohull on the Basis of Parametric Hull Design
Stefan Harries, Claus Abt
FAST99 – 5th International Conference on Fast Sea Transportation (FAST 1999)
© August 1999 | Seattle, WA, USA
Form Parameter Approach to the Design of Fair Hull Shapes
Stefan Harries, H Nowacki
10th International Conference on Computer Applications in Shipbuilding (ICCAS ’99), Massachusetts Institute of Technology
© June 1999 | Cambridge, MA USA
Einsatzmöglichkeiten von Wellenschnittverfahren für den hydrodynamischen Schiffsentwurf (Applicability of Wave Cut Analysis for Hydrodynamic Design)
Stefan Harries, D Schulze, H-D Stinzing
Bericht Nr. 1285 / 99, Zentraleinrichtung Versuchsanstalt für Wasserbau und Schiffbau, Technische Universität Berlin
© Mai 1999 | Berlin, Germany | not available for download
Parametric Design and Optimization of Sailing Yachts
Stefan Harries, Claus Abt
14th Chesapeake Sailing Yacht Symposium (CSYS)
© Januar 1999 | Annapolis, MD, USA
Parametric design and hydrodynamic optimization of ship hull forms
Stefan Harries
Mensch & Buch Verlag, ISBN 3-933346-24-X
© 1998 | not available for download
Parametric Curve Design Applying Fairness Criteria
Stefan Harries, Claus Abt
International Workshop on Creating Fair and Shape-Preserving Curves and Surfaces, Teubner Verlag
© 1998 | Potsdam/Berlin, Germany
Numerical Investigation of a Systematic Model Series for the Design of Fast Monohulls
Stefan Harries, D. Schulze
4th International Conference on Fast Sea Transportation (FAST 1997)
© Juli 1997 | Sydney
Rechnererzeugte Propellergeometrien – Computer Aided Geometric Modeling of Propellers
Stefan Harries, Bernd-Leopold Käther
Jahrbuch der Schiffbautechnischen Gesellschaft e.V. (STG), 91. Band, 1997. Schriftliche Fassung zum gleichnamigen Vortrag, STG-Sprechtag Einfluß von Innovation aus der Forschung auf moderne Entwurfsprozesse einer Werft
© März 1997 | Flensburg, Germany

CAESES-Related Papers from Others (Selection)

The following papers are by other parties, hence FRIENDSHIP SYSTEMS cannot provide a copy of these papers. You want to show up in this section with your CAESES-related work? Did you use CAESES for your scientific work or project? We would be glad if you send us a copy of your work so that we can reference it here.

Investigation and Optimisation of High-Lift Airfoils for Airborne Wind Energy Systems at High Reynolds Numbers
Denes Fischer, Benjamin Church, Christian Navid Nayeri and Christian Oliver Paschereit
Wind 2023
https://www.mdpi.com/2674-032X/3/2/16
© June 2023 | English
Automated CFD shape optimization of stator blades for the PediaFlow pediatric ventricular assist device
Mansur Zhussupbekov, Greg W Burgreen, Jeongho Kim, James F Antaki
Fluid Dynamics (physics.flu-dyn); Tissues and Organs (q-bio.TO), Cornell University
https://doi.org/10.48550/arXiv.2211.04401
© November 2022 | English
Mixed-Fidelity Design Optimization of Hull Form Using CFD and Potential Flow Solvers
Gregory J. Grigoropoulos, Christos Bakirtzoglou, George Papadakis and Dimitrios Ntouras
Journal of Marine Science and Engineering (JSME)
https://doi.org/10.3390/jmse9111234
© November 2021 | English
Shape Optimization of Tire Tread Pattern to Minimize Water Splashing on Vehicle Body using Particle Method CFD Simulation
Dr. S. Tokura, Prometech Software Inc., Japan
NAFEMS World Congress
© October 2021 | English
RoPax Design Revisited—Evolution or Revolution?
Cantekin Tuzcu, Cameron Dinsdale, Jack Hawkins, George Zaraphonitis, Fotis Papadopoulos
In: A. Papanikolaou (Ed.), A Holistic Approach to Ship Design – Vol. 2: Application Case Studies, Springer
https://doi.org/10.1007/978-3-030-71091-0_11
© 2021 | English
Hydrodynamic Optimisation of a Containership and a Bulkcarrier for Life-Cycle Operation
George Zaraphonitis, Aggeliki Kytariolou, George Dafermos, Scott Gatchell, Anders Östman
In: A. Papanikolaou (Ed.), A Holistic Approach to Ship Design – Vol. 2: Application Case Studies, Springer
https://doi.org/10.1007/978-3-030-71091-0_8
© 2021 | English
Design of a Multi-Purpose Ocean Vessel
Romain Le Néna, Julien Calvignac, Alan Guégan
In: A. Papanikolaou (Ed.), A Holistic Approach to Ship Design – Vol. 2: Application Case Studies, Springer
https://doi.org/10.1007/978-3-030-71091-0_6
© 2021 | English
Design and Operation of an Offshore Support Vessel
Sverre Torben, Martijn de Jongh, Paulo Macedo, Lars Husdal, Bjørnar Vik, Michel Rejani Miyazaki, Lefteris Koukoulopoulos, Chara Georgopoulou, George Dimopoulos, Alan Guégan, Julien Calvignac, Vincent Le-Diagon, Ningxiang Li
In: A. Papanikolaou (Ed.), A Holistic Approach to Ship Design – Vol. 2: Application Case Studies, Springer
https://doi.org/10.1007/978-3-030-71091-0_3
© 2021 | English
Numerical and Experimental Optimization Study on a Fast, Zero Emission Catamaran
Apostolos Papanikolaou, Yan Xing-Kaeding, Johannes Strobel, Aphrodite Kanellopoulou, George Zaraphonitis and Edmund Tolo
Journal of Marine Science and Engineering (JSME)
http://dx.doi.org/10.3390/jmse8090657
© August 2020 | English
Valve Geometry and Flow Optimization through an Automated DOE Approach
M. Olivetti, F. Monterosso, G. Marinaro, E. Frosina, P. Mazzei
Fluids Journal
© 2020 | Italy | English
A Study on the Statistical Calibration of the Holtrop and Mennen Approximate Power Prediction Method for Full Hull Form, Low Froude Number Vessels
L. Nikolopoulos, E. Boulougouris
Journal of Ship Production and Design
© 2018 | Scotland, UK | English
Parametric modelling of tanker internal compartment layout for survivability improvement within the framework of regulations
H. Jafaryeganeh, M. Ventura, C. Guedes Soares
© 2017 | Portugal | English
Design Optimization of the Lines of the Bulbous Bow of a Hull Based on Parametric Modeling and Computational Fluid Dynamics Calculation
W. Luo, L. Lan
Mathematical and Computational Applications – Open Access Journal – MDPI
© 2017 | China | English
Optimierung – neue Möglichkeiten in der Brand- und Evakuierungssimulation
A. Loewe, S. Ritz
Schadenprisma – Wissenschaft/Forschung , Ausg. 4/2015
© 2015 | Germany | German
Resistance and Seakeeping Optimization of a Fast Multihull Passenger Ferry
G. Vernengo, S. Brizzolara, D. Bruzzone
International Journal of Offshore and Polar Engineering (ISSN 1053-5381) , Vol. 25, No. 1, March 2015, pp. 26–34
© 2015 | USA / Italy | English
PBCF Design Optimisation and Propulsion Efficiency Impact
K. Mizzi, Y. Kemal Demirel, C. Banks, O. Turan, P. Kaklis
Influence of EEDI on Ship Design, 24-25 September 2014, London, UK
© 2014: The Royal Institution of Naval Architects | Scotland, UK | English